Please note that the mandatory device activation procedure requires an active Internet connection on your computer. Activating an Antelope Audio device offline is not possible. Your 10MX must be activated online to work.
1. Connect the provided power supply to the power connector on the 10MX
rear panel. Connect the power plug to an AC/DC mains outlet.
Note: The switching power supply automatically accommodates mains electricity in any
country. Always use the provided power supply to prevent accidental damage.
2. Connect the 10MX to a Windows or macOS computer.
3. Open your internet browser and navigate to https://en.antelopeaudio.com/login/
4. Login to the Antelope Audio user area with your e-mail and password. If you don't have an account, visit https://en.antelopeaudio.com/sign-up/ to create one.
5. Click on the 'Activate New Device' button.
6. Click on 10MX from the device list.
7. Download and install the Antelope Launcher application for Windows or macOS
8. Open the Antelope Launcher application and click on the 'Login' button.
Enter the email and password you used to login into the Antelope Audio user area and click 'Login'.
9. Click on 'Activate device'.
10. Upon successful activation, the final window will read ‘You have successfully activated
your device. Software is required to be installed and up to date for the device to be used.'
Click 'Software Installation' to go through the rest of the setup process or ‘Install Later’ if
you prefer to postpone this step. It is available later via the launcher’s Manage Device
menu.
The following warning message advises to power off or unplug any devices connected to
the interface to avoid any potential damage during the firmware installation
process. Click ‘Continue’ when ready and go through the instructions that follow.
After the installation is complete, you can proceed with the instructions for your operating
system and configure the interface for use with your Windows or macOS computer.
Note: The 10MX will be listed in the 'My Hardware' page of the Antelope Audio
user area with its serial number and activation date.
