Released on 08.12.2023
1.1.6 Contains the following software:
Mac OS - Firmware 1.14, Control Panel 1.04, Unified Driver 4.6.0 (for hw rev 1,2)
Windows - Firmware 1.14, Control Panel 1.04, driver_usb-orion32_gen4 5.0.4 (for hw rev 1,2)
New in this release:
- Fixed an issue with the meters section of Orion32+Gen4 not reverting to the default settings for the peak meters after visualizing other channels and closing the CP.
- Fixed an issue with the line-out signal from Orion32+Gen4 does not go to the Line-in of another device after factory reset unless sample rate is changed.
- Fixed an issue with front panel of Orion32+Gen4, the peak meters visualized in the left display don't return to default view after factory reset.
- Fixed an issue with the monitor output of Orion32+Gen4 not working unless an activation code is added for the Surround feature.
- Fixed an issue with some functions of Orion32+Gen4 not working after factory reset: monitor out and line out signal.
- Fixed an issue with the ADAT IN clocking not working.
- Fixed an issue with the14 dBu setting for the Line Out Trim set on the front panel not highlighted there.
- Fixed an issue with several settings for Line In Trim set on the front panel of Orion 32+Gen4 not behaving properly.
- Fixed an issue with the brightness setting in the CP of Orion32+Gen 4 having a minimum value of 20%, and on the front panel the minimum value of 5%.
- The Routing menu in the front panel of Orion32+Gen4 the Surround In and Surround Out channels have been exchanged.
- Fixed an issue of playback stopping when switching between hardware presets.
- Fixed an issue with a black strip appearing in the peak meters on the front panel of Orion32+Gen4 when regulating gain up and down.
- Fixed an issue with the the meters section of Orion32+Gen4 not reverting to the default settings for the peak meters after visualizing other channels and doing a factory reset.
- Fixed the issue when switching between 24 & 32 USB channels on the Orion 32+ GEN4 freezing the Control Panel.
- Fixed an issue with the surround level mute functionality not working,
- Orion 32+ GEN4 now sends and receives audio signal via MADI without issue.
- DIM functionality now affects both POST and PRE surround peak meters
Fixed an issue with Firmware 1.11 from Bundle 1.1.3 for the Orion32+ GEN 4 causes the device's front panel to glitch out and make it undiscoverable in the Launcher
MRC RELATED:
- Fixed an issue with the BM button on the MRC activating Bass Management functionality on surround formats that shouldn't have it.
- Fixed an issue with Orion GEN4 / Galaxy 32 SC Monitor Out level jumps from 0 to -inf dB when changed from MRC.
- Fixed an issue with the EQ section turning off the light of the specific channel on the MRC when you bypass it.
- Fixed an issue with MRC lights not glowing according to the Surround channel configuration.
- Fixed an issue with the lights of the MRC buttons not working and the Solo button functionality not working with Orion32+Gen4