We are happy to announce that as of October 9, 2023, all Antelope Audio devices and software components in the following lists are compatible with the latest operating system from Apple – macOS Sonoma 14.0 under Intel & Apple Silicon processors.
Hardware Compatibility:
Owners of the following Legacy audio interfaces can run their devices on macOS Sonoma, with the latest versions of their device software and unified audio driver:
Model Name: |
Axino |
Discrete 8 Synergy Core |
Discrete 4 Synergy Core |
Discrete 8 |
Discrete 4 |
Orion Studio Rev2017 |
Orion Studio |
Goliath HD Gen 3 |
Goliath |
Orion 32+ |
Orion 32 HD Gen 3 |
Zen Studio+ |
Zen Tour |
On Apple(M1/M2) when a device is connected for the first time, the following message will appear:
Click Allow
Software Compatibility:
Software | Version | Compatibility Status |
Antelope Launcher | 3.1.0 | Compatible |
Unified Audio Driver | 4.5.0/4.6 | Compatible |
Antelope Manager Server | 1.8.16 | Compatible |
Edge Duo Native Plug-in | 2.4.0 | Compatible |
Verge Native Plug-in | 1.3.1 | Incompatible |
Edge Quadro Plug-in | 1.4.0 | Incompatible |
Edge Solo Plug-in | 1.4.5 | Compatible |
Edge Note Plug-in | 1.4.1 | Compatible |
afx2daw | 1.2.1 | Compatible |
*Edge Duo AAX plug-in is not compatible
Updating the OS from Ventura to Sonoma might require allowing the Kernel extension (Unified Driver) in the Security and Privacy settings as well as in Recovery Mode (for Apple silicon).
To allow the Driver in Security and Privacy, follow this article.
For Apple silicon M1/M2 to enable the Driver in Recovery mode, follow this article.
We have confirmed normal operation of afx2daw with the latest versions of the following DAWs
Avid Pro Tools
Ableton Live
Image-Line FL Studio
PreSonus Studio One
Steinberg Cubase
Bitwig Studio
Cockos Reaper
*With M1/M2 computers some DAWs need to run under "Rosetta" in order for the afx2daw to work. For more details about Rosetta, please go through this Apple article.
For Logic Pro users:
We’ve detected inconsistent behavior when afx2daw gets validated by Logic Pro X’s "auvaltool".
In some cases, the validation does not pass and fails with the message “Crashed validation". You can disconnect your Antelope interface from the computer and “Reset & Rescan“ plug-in. If you encounter any other validation issues or other difficulties with the afx2daw plug-in, please go through the following article.
For more information, please check the master compatibility chart.